Feature

●This module MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer. Hence, the MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP).
●The MPU-9250 also with an embedded temperature sensor. This module includes pull-up resistors on the SDA, SCL, and nCS lines, pull-down resistors on the FSYNC and AD0 lines, and an on-board 3.3V voltage regulator allowing you to power the module from 5V sources. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator.
●Power supply: 3-5V (internal low dropout regulator),
●Communication: standard IIC communication protocol .
●【Manufacturers two-year after-sale warranty】Built-in 16bit AD converter, 16-bit data output
●NOYITO MPU-9250 Test Code Schematic Document https://1drv.ms/u/s!AlzQUCOyZQhKgVYzDavgr5yu6Wwk?e=4zwnDg


Description

Manufacturers two-year after-sale **
Specifications:
On-board pull-up resistors on SDA, SCL, and nCS
On-board pull-down resistors on FSYNC and AD0
3-Axis Accelerometer
Range: up to ± 16 g
Sensitivity: up to 16,384 LSB/g
3-Axis Gyroscope
Range: up to ± 2000 degree/sec
Sensitivity: up to 131 LSB/degree/sec
3-Axis Magnetometer
Range: ± 4800 μT
Sensitivity: 0.6 μT/LSB
Supply Voltage: 4.4 to 6.5 V or 3.3V if you solder the solder jumper near the on-board voltage regulator
Interface: I2C
2C Address: 0x68 by default, 0x69 if AD0 is pulled high
Board Dimensions: 25.5mm (1.004") long x 15.4mm (0.606") wide, 3mm (0.118") inside diameter of mounting holes
Weight: 2.72g (0.096oz)

Pakcage Included:
1pcs MPU9250 Module