Feature

●Product name: DC brushless water pump/centrifugal pump
●Size of water inlet and outlet: 4 external threads, inner diameter 12.5mm.
●Installation mode: lower than the water surface, without self-priming function. For details, please refer to the detailed description.
●The pump can be widely using used in sewage sampling, large flow rate of liquid transfer and low noise for the workplace; Large and super large aquarium, small swimming pool, and other purposes.
●Service: If you have any problem, please contact with us, we will reply you within 24 hours.

Description

Product name: DC brushless water pump/centrifugal pump
Applicable V range: DC12-24V
Rated V: DC 24V
Working current: 0.84 A
Power: 23 W
Lift: 4m
Flow: 10L/Min (600L/h)
Weight: 215 g
Line length: 41cm
Wiring: red wire positive pole, black wire negative pole (cannot be reversed)
Dry pumping function: no dry pumping
Installation mode: lower than the water surface, without self-priming function
Size of water inlet and outlet: 4 external threads, inner diameter 12.5mm

Notes for use:
Brushless water pump, the positive and negative poles shall not be connected inversely, the red wire positive pole and the black wire negative pole.
Do not idle, and prevent dry pumping due to lack of water.
It is not a self-priming pump. The water pump can be used inside or outside the water tank, but cannot be higher than the water surface.
This pump can also be used at 12V, and its working current is about 0.39A. Only half of the 24 volt performance is achieved.

The water inlet and outlet are externally threaded, with a size of 1/2, that is, 4 minutes of external thread (the external diameter of the thread is about 19.8mm).
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.