Feature

●Pump cable length: about 110 MM; Pump weight: 395 grams.
●V: DC12V; Current: 0.48 A; Flow: 120 L/H; Pressure: greater than 9.5 KG. For details, please refer to the detailed description.
●The motor of this brushless water pump adopts a brushless motor with an outer diameter of 35.7 MM. The motor has double ball bearings at the front and rear, and a built-in drive board.
●The pump can be widely using used in sewage sampling, large flow rate of liquid transfer and low noise for the workplace; Large and super large aquarium, small swimming pool, and other purposes.
●Service: If you have any problem, please contact with us, we will reply you within 24 hours.

Description

Miniature self-priming pump, diaphragm pump, brushless motor with double ball bearing built-in drive board, the flow rate of this pump is not bad, it is 2 L/min, which is 120 liters/hour, but this pump The main feature of the pump is the high pressure, its pressure reaches more than 9.5 KG, which is very powerful, so it is generally suitable for booster pumps, spray pumps, or ink pumps.

The motor of this brushless water pump adopts a brushless motor with an outer diameter of 35.7 MM. The motor has double ball bearings at the front and rear, and a built-in drive board.

Note: This pump is a DC brushless water pump. It is strictly forbidden to connect the positive and negative poles of the brushless motor in reverse. The red wire is connected to the positive pole, and the black wire is connected to the negative pole. If they are reversed, the drive board will be burned.

Pump cable length: about 110 MM
Pump weight: 395 grams
V: DC12V
Current: 0.48 A
Flow: 120 L/H
Pressure: greater than 9.5 KG
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.