Feature

●Built-in driver board, the power is about 40W, the pumping is super powerful.
●It needs three sets of DC power supply, the main power supply is DC310V, The power supply to the driver board IC is DC15V, There is also a set of DC2V-6.5V power supplies with adjustable speed.
●When the speed regulating voltage is as low as DC2V, the pump has completely stopped running. Normal start-up operation above 2.1V.
●Long working life, It is smooth operation, high efficiency, good performance. Small volume, low noise.
●Our small pump is designed with a mini size and light weight, it is easy and convenient to use.

Description

HyKab
The marked flow rate of this pump is only 5L/min,
But the measured pumping is very powerful.
I have sold a DC24V17W brushless water pump before,
Its label flow rate has reached 9L/min,
But its flow rate is far inferior to this pump.
But it is reasonable to think about it,
This water pump is almost 40W,
That 24V water pump is only 17W,
The power varies a lot, and the manufacturers should be different.
The marked parameter standards are also different.
This pump is really good at pumping water,
We say that its more modest to drain a bof water in more than 30 seconds.
I didnt calculate the carefully,
It feels like it can be done in more than 20 seconds.
Outer diameter of water inlet: 26.9 MM
Outlet diameter: 27 MM
Voltage: need three sets of DC power supply 310V, 15V, 6.5V
Power: about 40W
Head: up to 10 m
Flow rate: 5 L/min
Water temperature: up to 80 degrees
Speed: 5720 RPM
Steering: CW
Line length: 130 MM
Weight: 535 grams
It is estimated that this pump cannot be used as a submersible pump.
It can only be used in places other than liquids,
Also, it is an impeller pump and cannot be self-priming.
Water can only be pumped after irrigation or diversion,
And the pump is suitable for idling,
Long idle will damage the impeller and shaft.
The normal operation of this pump requires three sets of DC power supplies,
Its more complicated, please be careful when you dont have professional skills.
The use of high-voltage motors is inherently dangerous.
The first element of safety needs to be concerned,
So if you dont know how to use it, take it carefully,
We cannot provide technical support!
Note: