Water pump 2 HP PRISMA45N-2/3224 The water pump 2 HP PRISMA45N-2/3224, Espa brand, is horizontal multi-stage centrifuge type. Suction and discharge diameter is 1 1/2 inch. The connection in both cases is with NPT female thread. Its operating voltage is three phase at 220 or 440 V. The nominal design expense of the 2 HP PRISMA45N-2/3224 water pump is 45 gallons per minute (170 liters per minute) It is suitable for use in hydraulic systems with dynamic loads of 10 to 30 mca. It has a yield of 290 liters per minute at 10 mca and 152 liters per minute at 30 mca. The 2 HP PRISMA45N-2/3224 water pump is part of the PRISMA series of horizontal multistage centrifugal pumps brand Espa. Applications of PRISMA series horizontal multistage pumps. Especially recommended for applications with drinking water, stands out for its extremely quiet operation. Designed for water supply to homes, small irrigation systems and clean water pumping applications where a robust and compact pump is required. In addition, they are widely used in hydropneumatic systems and especially in constant pressure systems. Giving incredible results and ensuring the fulfillment of their functions. In addition to its self-aspirating capacity up to 2 meters, it is greatly increased by installing a foot valve. PRISMA series pumps have a temperature range of the liquid to be pumped from 4 to 40º C. Construction features of PRISMA series water pumps Body and impellers in stainless steel 304 suction and discharge in cast iron. In addition, the diffusers are manufactured in Noryl (PPO reinforced with fiberglass load) The motor shaft comes in stainless steel 420 While the mechanical seal is made of Gratito/alumina and the engine housing in aluminum. The motor is asynchronous and two-pole, and has an IP44 protection, its insulation is class ~ for high temperature, and also the service is continuously In addition. the engine is completely closed v entered by air. with built-in thermal profection.