Feature

●Large flow brushless impeller water pump, The actual measurement supports wide V 5-12V work.
●If you need to use the outside of the water tank, you can use glue or other things to stop the water from leaking. The water pump comes with a lead length of 65CM.
●Measured 5V working current 0.27A, flow rate 1.7L/per minute, 8V working current 0.46A, flow rate 2.8L/per minute, 12V working current 0.68A, flow rate 4L/per minute.
●The pump can be widely using used in sewage sampling, large flow rate of liquid transfer and low noise for the workplace; Large and super large aquarium, small swimming pool, and other purposes.
●Service: If you have any problem, please contact with us, we will reply you within 24 hours.

Description

Large flow brushless impeller water pump,

Nominal V 12V8.5W,

The actual measurement supports wide V 5-12V work,

Large flow fully sealed waterproof water pump,

This pump was originally used in water,

There is a tiny air pressure balance hole on the pump head to prevent air blockage and no water absorption.

If you need to use the outside of the water tank, you can use glue or other things to stop the water from leaking. The water pump comes with a lead length of 65CM.

Be sure to pay attention to the positive and negative connections, red positive and black negative.

The pump weighs 105 grams.

Measured 5V working current 0.27A, flow rate 1.7L/per minute,
8V working current 0.46A, flow rate 2.8L/per minute,
12V working current 0.68A, flow rate 4L/per minute,
This data is the result of the test at a height of 25CM, for reference only.

This impeller pump is not a self-priming pump.
The impeller must be filled with water to run out of water, and the pump is strictly prohibited from idling.
Idling without water will affect the life span,
There will be abnormal noises in the dry grinding due to lack of water.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.