1. Solder Clean: The solder sucker wire is made of copper material and a special chemical, which ensures high efficiency, strong removal force, and saves time and materials.
2. Copper Material: The solder sucker wire is used to remove and absorb excess solder, copper has oxidation resistance, resistance and good thermal conductivity.
3. Ensure Circuit Safety: The solder sucker wire can be used when the pins are connected to tin when soldering components. It can absorb the tin adhered to the pins and prevent short circuits between the pins.
4. Wire Length 4.9ft: The total length of the soldering wire reaches 4.9ft, and one coil can be used for a long time.
5. Wide Application: The soldering wire can also be used to clean the pads of the BGA components, or when the BGA components are balled, the soldering wire is used to clean the pads.
Spec:
Item Type: Solder Sucker Wick
Material: Copper
Model: XD-2515
Width: Approx. 2.5mm / 0.1in
Length: Approx. 1.5m / 4.9ft
Working Temperature: Normal welding temperature
Usage: Suitable for cleaning PCB and other solder
How to Use:
1. For the solder that you want to remove, place an appropriate length of tin suction wire on the cleaned reflow point, and then lightly press and heat it with the tip of an electric soldering iron. After the solder melts, it can be absorbed by the tin suction wire.
2. Once you absorb the solder, please remove the soldering iron and the soldering wire at the same time.
3. Please cut off the used desoldering wire with scissors.
Package List:
5 x Solder Sucker Wick
Note:
Sealed away from light, dry and dustproof