Feature

●WIDE APPLICATION: This rod end bearings is widely used in hydraulic cylinders, forging machines, automatic dampers, etc.
●WIDE APPLICATION: This rod end bearings is widely used in hydraulic cylinders, forging machines, automatic dampers, etc.
●The inner diameter of the bearing center hole is 16mm, the thread size is M16 x 1.5, the static load is 28.5KN, and the dynamic load is 21.6KN.
●If you are not satisfied with our products or services for any reason, please feel to contact us and give us the opportunity to solve the problem. We will bring customers a good shopping experience as our goal.
●SCOPE OF APPLICATION: Mainly used for hydraulic cylinders, forging machinery, and automatic shock absorbers.

Description

1. Can be used for slow swing and slewing motion, and can withstand huge loads.
2. This is a kind of sliding bearing, mainly used for work with low concentricity requirements and high working pressure.
3. With a certain axial limit capability, allowing the curve of the shaft and the housing hole to have a relatively large relative skew.
4. Widely used in hydraulic cylinders, forging machines, automatic dampers, etc.
5. The inner diameter of the bearing center hole is 16mm, the thread size is M16 x 1.5, the static load is 28.5KN, and the dynamic load is 21.6KN.

Specification:
Item Type: Joint Bearing
Material: Galvanized
Model: SAL16T/K
Center Hole Inner Diameter: Approx. 16mm / 0.6in
Thread Size: M16 x 1.5
Static Load: 28.5KN
Dynamic Load: 21.6KN

packing list:
1 x Joint Bearing