1. Environment : The standard of environment test is the ambient temperature of 20 degrees Celsius and relative humidity of 65%RH.
2. Test position : Horizontal
3. Rated load : Air pressure 300mmHg ; Air pressure -300mmHg
4. Rated voltage : DC 12V
5. Voltage range : DC 9.6V to 14.4V; we suggest you connect the rated voltage
6. The highest current : less then 350mA
7. At DC 12V ; The water flow is 1 to 1.3 L/Min ( no load )
8. The maximum pressure value shall be more than 60KPa while pressurizing with DC 12V in a 100CC tank from 0 till dead-head pressue value
The following is a structural diagram and material introduction of the air pump
1. Using high-quality materials, sturdy and durable, slow heating, low noise, and surface
2. The contact angle of the supply is made of copper, which promotes the motor to conduct electricity quickly and is not easy to damage.
3. Using environmentally friendly raw materials, safe to use
5. Water outlet
6. Water inlet
7. PVC material
8. The surface of the motor is
9. Connect the positive pole of the DC supply
10. Connect the negative pole of DC supply