Feature

●?EASY TO OPERATE: The 929D-V desoldering pump is a combination of soldering iron and desoldering, designed with a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up,which can enjoy one-hand continuous desoldering.
●?HIGH-QUALITY MATERIALS: Made of ABS material, with anti-skid handle, nylon nozzles,Unlike the old-fashioned desoldering gun, this solder sucker is plugged into the power plug, and the desoldering is preheated for about 3 minutes, and the process of tin melting/absorption can be performed, Comfortable grip and durable.
●?THOUGHTFUL DESIGN: We have matched 2 kinds of desoldering tips with different diameters (φ1.0mm & φ1.2mm), which can be replaced with different desoldering tips according to different solder joints to prevent clogging, We also paired with a cleaning needle to further prevent clogging problems,Note: Replace the nozzle after the soldering iron has cooled down completely.
●?WIDELY USED: Desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering,removing relays and other components from the printed circuit board, etc. To meet your various soldering needs.
●?VALUE PRODACT: There are also two built-in gaskets. If you feel that the suction is too small, it may be that the gaskets are aging, and the strong suction can be restored after replacement. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!

Description

FEATURES:

High temperature, anti-static, heat-resistant and durable.

Good little solder sucker, have a good bit of suction, you can just hang onto it and use your thumb to reset and suck.

Simple design allows easy one-handed use, lightweight and compact, suck the solder away easily.

Material: Made of stainless steel and high-temperature resistance plastics, is Stable and durable.

Perfect desoldering tool for thick film integrated circuits and large components with large solder joints.

Single-Handed Operation (with integrated desoldering pump)

Preciva integrates a soldering iron with a desoldering pump for you to desolder joints continuously without jam! You can operate this iron single-handedly and desolder through-hole components and excess solder (solder bridge) from SMD boards with ease.


Desoldering Nozzles The desoldering nozzle is interchangeable and we included 2 nozzles in the package. CAUTION: change nozzle only when the iron is cooled completely.	Heat-resistant Silicone Handle Thread head of lightweight pen soldering iron for Electronics use heat resistance materials, Silicone handle insulate temperature effectively.	Desoldering Gun Say goodbye to the inconvenience and inefficiency of other traditional manual solder sucker, let this electric vacuum desoldering gun enhance your productivity in desoldering work. Choose it and you won’t be regret.

In the box:

1 x 30W Desoldering pump

1 x Cleaning Pin

2 x Desoldering Nozzles (1.0mm | 1.2mm)

1 x Cleaning Sponge Base

2 x washer

Application: tin melting/soldering

Warm Tips:

Please read the portable electric desoldering gun instruction manual in detail at first

Please really take care of yourself when you on desoldering practice working anti-scalding

Keep desoldering gun kits always from your bab.


Keep it quick Don’t stay at the joint for too long to prevent damaging the solder pad, once the solder is completely melted, press the trigger to extract and take the iron away from the joint.	Cleaning Pin With it, you can clean the eletric vacuum desoldering iron quickly, it can prevent clogging problems.	Removable Storage Chamber The design of the detachable waste tin storage tube makes cleanup easy and fast, without worrying about mess and clogging, ensuring a comfortable process throughout your desoldering work.

Notice:

1. This product contains electrical insulating protective material (mica). It is normal for white smoke to appear within 20 minutes after the first use of the product. This is the normal and expected occurrence of this product, please use it with confidence to ensure safety.

2. Do not stay at the joint for too long to avoid damage to the pad, once the solder is completely melted, press the trigger to remove the soldering iron from the joint.

3. Let the desoldering iron preheat for about 3 minutes before desoldering for a smoother desoldering experience.

4. The old PCB may have a layer of dust covering the solder joints, add fresh solder on the solder joints when desoldering to speed up the desoldering process.

5. When using, do not let any object (or human body) touch the heating element of the desoldering pump (the front metal component of the entire soldering iron) to avoid burns.