Feature
●( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
●( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
●( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
●( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
●( Widely used Solder Remover ) The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
Description
MOGAOPI 4-in-1 Solder Removal Tool Kit
Package Included:
1 x Desoldering Pump
1 x Spare nozzle
1 x Solder Wick
1 x High Temperature Resistance Silicone Protective Tube
Suck the Solder Away Easily
- The solder sucker measures 206x20mm , which will fit your hands perfectly no matter if you are left-handed or right-handed. With metal body and high pressure vacuum, this desoldering pump can help you suck the solder away effectively.
Clean the Solder in Detail
- 2.5mm wide, 1.5m in length , the solder wick can clean the solder in some small or hard to reach areas. No clean flux, oxygen free copper wire. It will be a great accessory to remove the extra solder.
How to Use the Desoldering Pump
- Step 1: Press the plunger down until it is been locked and you will hear a click;
- Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
- Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pumps tip. Pull the trigger;
- Step 4: Repeat this process if necessary.
How to Use the Solder Wick
- Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
- Step 2: Remove the wick once the solder has been absorbed;
- Step 3: Cut off the used part of the wick;
- Step 4: Repeat this process if needed
Desoldering Pump Spare nozzle and High Temperature Resistance Silicone Protective Tube
High temperature &Strong suction of silicone nozzle protection sleeve, Don’t worry about the soldering iron nozzle suffering damaged anymore.
