Feature

●Complete set of accessories: Our desoldering tool kit includes WEP 929D-V Desoldering Iron, 5 interchangeable desoldering nozzles (0.8mm & 1.0mm & 1.2mm & 1.5mm ) for 4 different sizes of through-hole components, a heat-resistant iron stand, a cleaning sponge, some cleaning pins. If you are looking for a complete desoldering tool that can handle desoldering jobs for various through-hole components without clogging, it is time to buy this one.
●Safe continuous desoldering: This product is 2 IN 1 soldering iron and desoldering iron that can be operated with a single hand. Our solder sucker tool provides a uninterrupted desoldering experience, and the heat deflector reduces heat for your hands, and you can desolder components with comfort. The desoldering kit is also equipped with a simple soldering iron stand, allowing the solder sucker can rest securely on the stand when not in use.
●Easy to operate: It needs 3 minutes of preheating when connected to power. To use, charge the piston, melt the solder 100%, and press the release to extract the solder. Our desoldering kit includes 5 desoldering nozzles that are replaceble. (Nozzles are consumable items) Note: Replace the nozzle after the desolder iron has cooled completely
●Easy to clean: Our product is super easy to clean.Cleaning can effectively prevent blockages from damaging the product. The scrap solder storage tube is removable for cleaning, and our desolder removal kit comes with a cleaning pin that is used to clean the heating element.
●Choose WEP with confidence: This desoldering iron kit is covered by our USA exclusive 1-Year product warranty, and our technical support team has your back with our 24-Hour support. NOTE: this product is rated for 110~127V USA Specification, DO NOT connect this iron to a 220V power socket.


Description

A man is handling different through-hole components with WEP 929D-V.A man is handling different through-hole components with WEP 929D-V.

Complete 2 IN 1 Desoldering Soldering Iron

WEP 929D-V Integrates soldering iron with desoldering iron that can work better than the traditional desoldering iron to handle different through-hole components.

A solder sucker with desoldering nozzles,heat deflector,tin storage tube and short charging handle.A solder sucker with desoldering nozzles,heat deflector,tin storage tube and short charging handle.

WEP 929D-V desoldering nozzles φ0.8mm & φ1.0mm & φ1.2mm & φ1.5mmWEP 929D-V desoldering nozzles φ0.8mm & φ1.0mm & φ1.2mm & φ1.5mm

WEP 929D-V heat-resistant iron stand that can hold the solder sucker securely when its not in use.WEP 929D-V heat-resistant iron stand that can hold the solder sucker securely when its not in use.

A man is cleaning the heating element of WEP 929D-V with the cleaning pin.A man is cleaning the heating element of WEP 929D-V with the cleaning pin.

4 Different Sizes Nozzles

This desoldering iron kit comes with 5 interchangeable nozzles in 4 different diameters for different through-hole components, which can meet your different work requirements.

φ0.8mm

φ1.0mm

φ1.2mm

φ1.5mm

Iron Stand

The iron stand is simple and comes with a sponge for holding the solder sucker securely when its not in use, as well as cleaning when needed.

Cleaning tool

The WEP 929D-V Desoldering kit contains a sponge and a cleaning pin.

Using the cleaning pin correctly can protect the solder sucker and extend its life.

A man is using the cleaning pin to clean the heating element of WEP 929D-VA man is using the cleaning pin to clean the heating element of WEP 929D-V

A man tin the desoldering nozzle of WEP 929D-V with solderA man tin the desoldering nozzle of WEP 929D-V with solder

A man places WEP 929D-V vertically to the component to desoldering different components.A man places WEP 929D-V vertically to the component to desoldering different components.

Using the cleaning pin to tin the nozzle when first used. Before cleaning, please make sure the solder has completely melted inside.

Always tin the nozzle with solder when in use. This prevents oxidation and extends life the life of the iron.The nozzle will fall off when it rubs against the components when you use it, it is normal to have an oxide layer, please use it with confidence.

Install the appropriate diameter of the suction nozzle, plug in and wait 3-5 minutes for it to heat up. Place the solder sucker vertically to the component, press the charging handle, and press the release button when the solder is completely melted to finish the desoldering process.

NOTICE: Please make sure the solder has completely melted before press the release button.

A man is using WEP 929D-V to handle different desoldering applications.A man is using WEP 929D-V to handle different desoldering applications.

Applications

Desoldering pump solder sucker is suitable for correcting errors on PCB boards, cleaning small components, resoldering and desoldering circuit boards , appliance repair and DIY welding, etc. It can be the best one to be chosen.

NOTICE: This product contains electrical insulator protective material (mica).it is normal for the product to emit white fumes for no longer than 20 minutes on first use. This is a normal and intended occurrence for this product, please rest assure for safe usage.

Specifications

Model number 929D V
Rated voltage range 110V-127V/AC, 60Hz
Rated power 30W
Control unit dimensions L265xW35xH27mm ±5mm
Operating ambient temperature 0℃～40℃/32℉～104℉
Nozzle diameter Ф0.8mm & Ф1.0mm & Ф1.2mm &Ф1.5mm
WEP Desoldering Nozzles Set 4 PCS 0.8/1.0/1.2/1.5mm #948P Stainless Cleaning Pin Set use WEP 858D hot air station for SMD soldering & rework, conformal and more. Use WEP 959D hot air station to handle all of your SMD rework and repair needs with ease. Use the WEP 948DQ-II 2-IN-1 Fume Extractor Soldering Iron Station to absorb solder smoke You can enjoy both a soldering station, and a hot air station in one station with WEP 8786D-I SE
WEP Desoldering Nozzles for WEP 929D-V WEP #948P WEP 858D WEP 959D WEP 948DQ-II WEP 8786D-I SE
Category Desoldering Nozzles Set Stainless Cleaning Pin Set Hot Air Rework Station Hot Air Rework Station 2-IN-1 Multi Station 2-IN-1 Multi Station
Functions ONLY Compatible with WEP 929D-V Compatible with WEP 948-III, WEP 948D-III, WEP 929D-V Hot Air Rework Hot Air Rework Fume extrator & Soldering Hot Air Rework & Soldering
Temp.Range 212℉~896℉ 212℉~896℉ 392°F~896°F 392~896℉
Other Parameters Hot Air Temp.Range: 212~896℉
PID Temperature Stabilization ? ?
Temparature Calibration ? ? ? ?
Standby/Sleep Mode ? ? ? ?

Product information