●【Quality Materials】27pcs 1/2" push fit plumbing fittings are made of high-quality brass for durability, strength, and corrosion resistance, and can withstand temperatures up to 200 PSI and 200°F. Lead-free brass is safe for potable water and circulating heating water distribution. ●【Easy to Install】The 1/2" push pex fittings are easy to install, you only need to insert the pipe deep enough into the joint by hand, no welding, clamps, or glue required. They can even be rotated after assembly for easy installation in tight spaces. ●【Disconnect Clip】The clip is made of high-quality plastic, which is strong and lightweight, you only need to place a disconnect clip on the side of the push-in joint, push it to disassemble the push-in joint, no other tools are needed in the process. ●【Wide Application】Push to connect brass plumbing fittings are suitable for copper pipes, CPVC, PEX pipes, whether they are used to repair water pipes, install water heaters, or renovate houses, they can connect most types of pipes in any combination. ●【Packing List】This push fit plumbing fittings includes 10*straight connector, 10*90 degree elbow fitting, 5*tee fitting, 2*end cap, 2*disconnect clip. The push-to-connect plumbing fittings can be used in plumbing system and hydronic heating applications.
[27Pcs 1 & 2 Plumbing Fittings]
[2Pcs 1 & 2 Coupling]
Description
How to Connect
STEP 1
Make sure it has a smooth cross-section.
Note: If you are on copper pipe, we further advise to ream the inside to reduce the roughness.
STEP 2
Use a deburring tool to ream the end of the pipe and then mark the insertion depth on the pipe.
STEP 3
Push both ends into the fitting until the depth line covered. If pipe is not fully inserted, it will leave room for leakage.
STEP 4
Complete connection.
Note: Kindly conduct the water test before installation!
STEP 1
Position the disconnect clip next to the end.
STEP 2
Press firmly the disconnect clip against the collar of the end.
STEP 3
Pull the pipe out of the fitting with a twisting action.