Feature

●Strong and durable: Copper and iron have anti-wear, anti-impact, anti-deformation, anti-fracture and other properties, extending the service life.
●Powerful: the heater can be widely used in the car temperature, foot warming, defrosting, fog removal, to meet your various needs. The surface is smooth and flat, can be wiped with a dry cloth, and is easy to clean.
●Energy saving: It requires no fuel and consumes less electricity, saving you a lot of energy. The switch can adjust the air volume indefinitely to meet your different needs.
●Efficient heating :12 thick copper tubes can heat the air passing through the core in seconds, providing more heat output. Built-in two cooling fans, timely heat dissipation, extend product life.
●Powerful air flow: The powerful blower motor and 4-hole outlet provide a powerful stream of hot air to the cabin.


Description

Description

The 12V four-way heater is a kind of energy-saving heater that functions in the same way that your factory cooling system used to. Hot coolant from the engine passes through the heater core, then the blower motor forces air through the core, and warm air is expelled into the passenger compartment of your vehicle.

Installation Bracket: It can support installation under the dashboard.

Application

It is suitable for cars, trucks, ships, RVs, vans, excavators, harvesters, etc.

Specification

Color: Grey

Optional Voltage: 12V

Power Supply: 8A

Material: Copper, Iron

Switch: Infinite Speed Regulation

Motor Type: Blower Motor

Weight: About 3kg/6.6lbs

Heater Size: 23*21*10cm/9*8*3.9inch

Required Fitting: 5/8 (16mm) Inner Diameter Water Hose (Not Included)

Instruction

Make sure the direction of flow through the cooling system.

Connect the hot coolant hoses to the inlet and outlet of the heater.

Wire the heater and switch it into your vehicle’s electrical system.

Connect the red wire of the switch with the positive pole of the power supply and heater.

Connect the blue wire of the switch with the negative pole of the heater.

Connect the black wire with the negative pole of the power supply.

Package Included

1* 12V Four-way Heater

4* Black Tubes

2* Tees

2* Mounting Brackets

1* Switch

2* Straight Fittings

6* Hose Clamps (0.6-0.9inch)

2* Screws

Notes

The heater needs to be connected to the engine cooling system.

The blower needs to be connected to the vehicles electrical system to blow out the warm air.