Feature(may vary by option.)

●130 CFM of forced air dries equipment in hours
●Hangs anywhere that can support 100-pounds?-in your garage, mudroom, gear room, or in the back of your van or toy hauler?no professional installation required
●2 Powering options included. The 12-volt car jack works in your vehicle, and the 12-volt wall plug works at home or hotels.
●3 Airflow settings dial-in your ideal drying time and fan volume
●11.5” W x 5”D x 6”H | 7lbs

[24 Port]




[5 Port]




[12 Port]




[Airhanger]




[12 Port Rolling Wheel Kit]





Description

AirHanger 12V Wetsuit and Gear DryerAirHanger 12V Wetsuit and Gear Dryer
AirHanger 12V Portable Gear DryerAirHanger 12V Portable Gear Dryer

GearDryer AirHanger 12V

The fully-portable GearDryer AirHanger puts an end to wet, sweaty, and stinky gear.

With over 130 CFM of forced air, heavy-duty construction designed to hang tough with saturated equipment, and two 12-volt plug options for use at home or on the road, the AirHanger is your new best friend and travel buddy.

Dry your wetsuit, race suit, bug out gear, jacket, and more in just a few hours time

Never worry about squeezing into wet neoprene or stinky leathers again. Hang the AirHanger on a secure point, place your jacket or piece of gear in line with the venting system, select a fan setting from Low, Medium or High, and let the AirHanger do its work.

From the beach to the racetrack to the job site, the AirHanger is the dynamic solution for keeping your gear dry, clean, and warm.

Leaving wet gear overnight causes odor and increased wear, and the AirHanger not only makes for better days, it also increases the lifespan of the gear that you rely on for work and play. The added mobility of the 12-volt car jack doubles down on the AirHanger’s utility.

Features/Specs

  • 130 CFM Forced Airflow
  • Hanger Holds Over 100Lbs
  • Two, 12-Volt Plugs Included
  • 3 Airflow Settings
  • 11.5” W x 5”D x 6”H | 7lbs

AirHanger Drying DrysuitsAirHanger Drying Drysuits

AirHanger Drying WetsuitsAirHanger Drying Wetsuits

AirHanger Power Supplies 12V and 110/120VAirHanger Power Supplies 12V and 110/120V

AirHanger 12V Wetsuit and Gear DryerAirHanger 12V Wetsuit and Gear Dryer

DRY GEAR QUICKLY

Dry wetsuits, drysuits, race leathers and more

130 CFM FORCED AIR

Dries your gear in hours instead of days, and

increases longevity of your expensive gear

FULLY PORTABLE

Dry items at home or in your vehicle, never struggle

getting into wet neoprene again

HEAVY DUTY CONSTRUCTION

Holds over 100lbs, accommodating

large suits, track gear, first responder gear, and more

GearDryer AirHanger 12VGearDryer AirHanger 12V

GearDryer AirDryer Drying DrysuitsGearDryer AirDryer Drying Drysuits

GearDryer AirDryer Drying WetsuitsGearDryer AirDryer Drying Wetsuits

GearDryer AirDryer 12V and 110/120V Power SuppliesGearDryer AirDryer 12V and 110/120V Power Supplies

GearDryer Dry = Warm Ski Gear Wheel Mount Kit air hanger GEAR DRYER DRY 24 Port Gear Dryer
Wall Mount 12 Wheel Kit and Freestanding Base Kit Accessory AirHanger GearDryer Solo GearDryer 24
Size/Compatibility 16”W x 6”D x 46”H | Weight: 46lbs Compatible ONLY with Wall Mount 12 11.5” W x 5”D x 6”H 11.5” W x 5”D x 6”H | 7lbs 32” W x 6”D x 46”H | 85lbs

Product Description

Features

  • Includes hardware for direct wall mounting
  • Option Rolling Wheel Kit sold separately
  • Versatile twist and lock port design allows you to customize the port layout to dry specific gear items
  • 5 pre-programmed settings allow you to select a 15-minute, 30-minute, 1-hour, or 2-hour dry cycle. Hold the 2-hour button for 3 seconds to initiate a 24-hour dry cycle


Specs

  • Capacity: 12 Individual Dryer Ports (6-Pair Boots or Gloves)
  • Fan CFM: 212
  • Heated Air Temp: Approx. 35ºF above ambient air temp
  • Volts: 120
  • Amps: 8 *With heat on


With two versatile set-up options to choose from, the GearDryer Wall Mount / Rolling 12 Port boot and glove drying system is the perfect addition to your workshop, ski home, or garage. The GearDryer Wall Mount / Rolling 12 Port dryer includes hardware for both direct wall mounting, and a hand-truck wheel kit that allows you to easily roll the GearDryer around your shop. With 12 individual dryer ports, more than 200 CFM of forced airflow, and the option to dry with heated or ambient air, the GearDryer Wall Mount / Rolling 12 Port is the ultimate boot, shoe, glove, and gear drying solution. The most important factor in effectively removing the wet and sweat from the enclosed spaces in boots and gloves is a high volume of forced air. Delivering more than 200 CFM of airflow, GearDryer is one of the most powerful drying systems available. Other drying systems dry with only ambient air or only heated air. GearDryer is unique in that it gives you the option to choose. GearDryer uses a special self-regulating heat element that increases the air temperature approximately 35ºF above the ambient air temperature. This gentle heat increase is safe on gear yet effectively speeds up dry times. GearDryer is the ultimate boot, shoe, glove, and gear drying solution.