Feature●Stainless Steel Material: This furniture hardware screw kit is made of thick stainless steel, which is strong and durable. It can withstand high pressure and torque, and is resistant to rust and corrosions. It can also maintain its luster and appearance for a long time, and is suitable for indoor and outdoor use●Easy to Carry: This hardware screw is combined in a box, which is easy to carry and not easy to lose. It has a transparent cover, which allows you to see the contents clearly and quickly. It also has a snap lock, which can secure the box firmly and prevent it from opening accidentally. It is convenient to store and transport●3-in-1 for Use: This hardware connecting screw is 3-in-1 for use, which is more convenient. It consists of a screw, a nut, and an eccentric cam, which can be easily assembled and disassembled by hand. It can also adjust the tightness and alignment of the furniture parts, and create a stable and firm connection●Suitable for: This hardware kit is suitable for various types of furniture, such as cabinets, wardrobes, bookcases, desks, etc. It can help you install and disassemble your furniture quickly and easily, especially when the fixing effect of non-solid wood fasteners is not enough. It can also save you time, and avoid damage to your furniture●Easy to Install: This screw kit is easy to make holes and install, according to the external sizes of each component. You just need to drill the corresponding holes on the furniture parts, and insert the screw, the nut, and the eccentric cam into the holes. Then, you can tighten the screw and the cam, and complete the installation. It is simple and straightforwardDescription
Specification:
Item Type: Furniture Hardware ScrewMaterial: Stainless steelSpecification:10 x Dowel: Approx. 6 x 40mm / 0.2 x 1.6in
10 x Dowel: Approx. 6 x 35mm / 0.2 x 1.4in
10 x Dowel: Approx. 6 x 32mm / 0.2 x 1.3in
30 x Eccentric Wheel: Approx. 11.6 x 14.9mm / 0.5 x 0.6in
5 x Flat Head Hex Bolts: Approx. 6 x 70mm / 0.2 x 2.8in
5 x Flat Head Hex Bolts: Approx. 6 x 50mm / 0.2 x 2in
5 x Flat Head Hex Bolts: Approx. 6 x 30mm / 0.2 x 1.2in
30 x Pre-Inserted Nuts: Approx. 6 x 10.5mm / 0.2 x 0.4in
10 x Barrel Nuts: Approx. 6 x 15mm / 0.2 x 0.6in
10 x Barrel Nuts: Approx. 6 x 12mm / 0.2 x 0.5inInstallation Instructions:Step 1: Knock the rubber particles into the "target position", the first board has been knockedStep 2: Tighten the screw and attached to the particles,Step 3: Align the hole of the board 2 with the screw and place it on board 1, while aligning the positioning dowelFinally tighten the eccentric wheel clockwise and tighten the screwInstallation Method:1. First install the three-in-one component in the above picture with a screwdriver into the reserved plastic hole2. As shown in the figure after completing the first step3. Use a hammer to install the cork into the corresponding empty space of the other plate4. Connect the 2 plates to be combined according to the above picture5. Use a screwdriver to install the three-in-one component into the hole as shown in the figure above and tighten it6.ОК
Package List:30 x Dowel 30 x Eccentric Wheel15 x Flat Head Hex Bolts30 x Pre-Inserted Nuts30 x Barrel Nuts