Feature(may vary by option.)
●Plastic & Stainless Steel
●Water flow meter-- install vertical, the tilt angle should not be exceeded 5 degrees.
●Water flow sensor-- the water flow sensor for water heater, imprinter, automatic water machine, and other flow measuring systems applied.
●Water control flowmeter-- applied structural stress for the sealing ring, avoid licking
●0.3-6l/min flow meter-- medium temperature should not exceed 120degree.
●Water flow sensor 0.3-6l/min-- with stainless steel ball inside the impeller, wear-resistant.
[mediumx3pcs Whitex3pcs]
[medium White]
[mediumx2pcs Whitex2pcs]
Description
Package Include
2 * YF-S401 0.3-6L/min Water Flow Sensor Flowmeter Water Control (White)
Characteristics
- Size (L * W * H): Approx 5.8 * 3.4 * 2 Water flow sensor 0.3-6L/min.
- Maximum Operating Current: 15 mA (DC 5V) Water control flowmeter
- Working voltage range: DC 5 - 18V
- Workspace: 0.3-6L / min
- Water pressure: ≤ 0.8 MPa
- Storage temperature: -25 - + 80 ℃
- Humidity range: 35% - 90% RH ( )
- Minimum nominal operating voltage: DC4.5 5V - 24V
- Output interface diameter: Ca. Outside 7mm, inside 3mm
- Red: Positive(+)
- Storage humidity: 25% - 95% RH
- Operating temperature range: ≤ 80 ℃
- Yellow: Signal output.
- Load capacity: ≤ 10 mA (DC 5V)
- Black: Negative(-)
- The water flow sensor for water heater, imprinter, automatic water machine, and other flow measuring systems applied Water flow meter.
- Install vertical, the tilt angle should not be exceeded 5 degrees 0.3-6L/min flow meter.
- With stainless the impeller, wear-resistant Water flow sensor.
Goods Description
Water flow sensor Can be used for water heaters, credit machines, water vending machine, flow measurement device.Water flow meter It is installed in the hot water inlet end for detecting water flow.Water flow sensor 0.3-6L/min Hall current sensor output corresponding pulse Signal and feedback to controller, then the controller will control the flow.0.3-6L/min flow meter Water flow sensor is mainly consists of plastic body, rotor assembly and hall current sensor.Water control flowmeter When water through the flow rotor assembly, rotor will rotate and will change as the flow change