Specification:
Item Type: Back Glass Cover Housing Door
Material: Glass
Weight: Approx. 103g / 3.6oz
Suitable: For Google Pixel 3 5.5 Inch G013A
packing list:
1 x Cell Phone Glass Back Cover
1 x Sled Bar
1 x Sled Piece
1 x Sim Card Card Pin
1 x Suction Cup
1 x Cleaning Cloth
1 x Cleaning Paper
3 x Screwdriver
3 x Rubber Band
How to Use:
Installation steps for reference:
1. Turn off the phone, use a heat gun (hair dryer), along the phone back cover around the heating, heating must pay attention to the temperature, not too hot.
2. After the heating is complete, the back cover of the phone to remove. Use a suction cup to suck up a gap in the back of the phone, use a triangular pry or pry bar, the phone back cover open, pay attention to the strength of the case.
3. Open the back cover of the phone to pay attention to the strength, otherwise the phone will be torn off the line. Finally tear off the new back cover of the sticker, according to the correct location to install. (Specific installation steps can refer to for Youtube or for Google search, there are similar related videos)