WEN 4227T 13-Amp 12-Speed Floor Standing Drill Press
Remember when power tools were actually powerful? The WEN 17-Inch Twelve-Speed Floor Standing Drill Press meets the needs of both home and professional users. This model includes a full 4-3/4 inches of stroke capacity, allowing users a large enough spindle travel to easily drill through a 4x4 board. Adjust the speed to 12 different stops between 150 to 2940 RPM (150, 290, 320, 400, 520, 560, 1000, 1240, 1520, 1720, 2150, and 3150 RPM). The 14-inch by 14-inch cast iron table features a one-inch coolant runoff channel around the outer lip of the table to prevent both the workpieces and the drill bits from overheating. The table also pivots up to 45 degrees in both directions and can be positioned up to 26 inches away from the chuck to accommodate even the largest of workpieces. The Class II 1mW laser pointer ensures maximum precision during drilling operations, creating an X through the center of your target. The JT3 chuck accepts bits anywhere from 1/16 to 5/8 inches in size with onboard key storage to make sure that the chuck key is always close by. Cast iron frame and base gives the machine a hefty support system to prevent the drill press from walking or vibrating during operation. This beast measures in at 30 by 14 by 67 inches in size with a weight of 214 pounds. And because it is a WEN product, the WEN 17-inch 13-Amp Twelve-Speed Floor Standing Drill Press comes backed by a 2-year warranty, a stocked inventory of replacement parts, and a friendly customer service team. Remember when you had the capacity to drill through a 4X4 all in one smooth stroke? Remember WEN.

WEN DPA2513 24-by-12-Inch Drill Press Table with an Adjustable Fence and Stop Block
Remember when you could drill into your big old workpieces? Take your drill press to the next level with the WEN Drill Press Table. The spacious 23-7/8-by-11-7/8-inch table creates additional support for larger workpieces. The sturdy 1-inch thick MDF body prevents warping and wobbling during operation. Onboard rulers maximize accuracy for precise and even cuts while the adjustable 23-5/8 in. x 2 in. fence and stop block allow you to perfectly line up any project. The removable insert allows users to drill completely through their workpiece without damaging the table. Our unique table design provides clearance for the drill press’ height adjustment crank, making for easy vertical adjustments of your table. Compatible with the entire line of WEN drill presses, including the WEN 8-Inch Drill Press (models 4206 and 4208), the WEN 10-Inch Drill Press (models 4210, 4210T & 4212), the WEN 12-Inch Drill Press (model 4214), the WEN 15-Inch Drill Press (model 4225), and the WEN 17-Inch Drill Press (model 4227). Although this drill press was designed with WEN in mind, its universal fit allows for installation on drill presses of all shapes and sizes. Simply tighten the included mounting clamps onto tables anywhere from 4 to 22 inches in width. This unit also comes with extra mounting clamps that double as hold down clamps to ensure your workpiece stays secure while drilling. And, because it’s a WEN product. all to make sure you remember WEN.