Feature

●【High Efficiency】- The drilling machine uses a 280w pure copper motor, which consumes less energy, has a small resistance, and can rotate at 15000rpm. It can complete the drilling operation in a short time, so you don’t have to wait for a long time.
●【Adjustable Design】- The pearl drilling machine is equipped with a stepless speed regulation switch and depth adjuster for targeted drilling according to different jewelry to provide you with more refined pearls.
●【Multiple Sizes】- The package includes 15 sets of special collets and drill bits made of plastic and copper, which can be used to drill most pearls without damaging them, and the fixing effect is good, fully meeting your needs.
●【Needle Chuck】- The drilling machiner is equipped with twist needles of different sizes, with diameters of 0.02inch, 0.03inch, 0.02inch, 0.04inch, and 0.047inch respectively. When punching, you need to insert the needle slowly to avoid twisting the needle or breaking the bead.
●【Application】- The 280W 110V pearl drilling machine driller is applicable to natural or synthetic jewelry with a diameter of 3-35mm/0.12-1.38inch, such as freshwater pearls, seawater pearls, South China Sea pearls, Tahiti black pearls, pearl oysters, coral, amber, gold, silver, copper and other accessories. At the same time, the product can also be widely used in jewelry stores, jewelry manufacturers, etc.


Description

Key Features

Exquisite Material: This drilling machine is mainly made of aluminum, so you can use it for a long time without frequent replacement, which will save you cost to some extent.

Simple Operation: The drilling machine is equipped with a power auxiliary handle device and a pedal switch. You just need to place the pearl on the installed machine and then operate it through the handle and pedal switch without tedious steps, allowing you to focus on the drilling and create perfect crafts.

Small Floor Space: The product size is 9*3.9*4.3inch, which will not take up too much space. After use, it can be placed in the studio or room at will.

How to Install

1. Install the depth regulator

2. Install the auxiliary handle.

3. Install the clamp.

4. Install the plastic round handles on both sides and adjust the spacing between the clamps.

5. Install the bottom dust hole.

6. Plug in the voltage and adjust the distance.

Specifications

Color: Black+ Yellow+Green

Model: KYD

Overall Material: Aluminum

Material of Foot Mat: Cast Iron

Material of Motor: Pure Copper

Material of Collets and Drill Bit: Plastic and Copper

Type: Jewelry Tools

Plug Type: US Standard

Voltage: 110V

Power: 280W

Speed: 0-15000 rpm

Suitable Diameter of Jewelry: 5-35mm/0.2-1.38inch

Diameter of Needles: 0.5mm/0.02inch, 0.8mm/0.03inch, 0.6mm/0.02inch, 1mm/0.04inch, 1.2mm/0.047inch

Clamping Range: 0.3-4mm/0.012-0.16inch

Gross Weight: 4.85kg/10.69lbs

Net Weight: 4.5kg/9.9lbs

Product Size: 23.5cm*10cm*11cm/9*3.9*4.3inch

Package Size: 30*20*20cm/11.8*11.8*7.87inch

Package Included

1 * Pearl Drilling Machine

1 * Pedal Switch

1* Bilingual Instructions(English+Chinese)

1* Tool Box

All Accessories for Use