1. WORKING RANGE: 20W cutting module kit with a cutting depth of 3-5mm (depending on different materials), fast processing speed and high accuracy.
2. APPLICABLE MATERIAL: This module can be used for carving plastics, wood, leather, rubber, acrylic, etc., or cutting wood and acrylic and non woven fabric.
3. PROTECTION GLASS: This module has built in protection glass, which can better protect the eyes during processing, safe and reliable in operation.
4. EXCELLENT DIODES: Composed of 2 high performance diodes, with a minimum of 0.12 x 0.12 millimeters, ensuring clear engraving patterns.
5. SMART OPERATION: Built in fast intelligent driver, temperature can be checked in a timely manner, fan intelligent setting, with noise reduction.

Specification:
Item Type: Module Kit
Material: Aluminum Alloy, ABS
Wavelength: 450nm±5nm
Power: 20W
Accuracy: 0.01mm
Input Voltage: 12V 3A
Fan Voltage: 12V
Cutting Depth: 3-5mm (depending on different materials)
Cutting Speed: 100mm/min
Working Temperature: 0-70℃
Service Life: 10000H
Engraveable Materials: Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non reflective electroplated coating, and painted metal, blackening art knives.
Cutable Materials: Cardboard, non woven fabric, veneer, acrylic, and some thin plastic sheets.
Interface Parameters: 3Pin (12V, GND, PWM)

How to Use:
Install and use directly.

PackageList:
1 x Module
2 x Connection Cables
1 x User Manual
1 x Fixed Plate
1 x Hex Wrench
4 x Screws
2 x Washers