[M12 x 1.5]

[M12 x 1]

[M12 x 1.25]

Hand Tap:
Thread Size: M12 x 1.5 (Right Hand); Square Shank Width: 7mm / 0.28"; Thread Length: 32mm / 1.26";
Total Length: 73mm / 2.87"; Accuracy: H2; Number of Flutes: 4 Straight Flutes

Round Die:
Thread Size: M12 x 1.5 (Right Hand); Outside Diameter: 38mm / 1.5", Thickness: 14mm / 0.55"

Package Content:

1pcs x Taper Tap, 1pcs x Bottom Tap, 1pcs x Round Die

Descriptions:9SiCr alloy tool steel tap and die set offers excellent hardness, toughness and wear resistance for durability. Uncoated thread tap & round die provide good cutting performance, great for threading a wide range of applications.
Taper Tap: Start the thread and guide it into the workpiece, commonly used when tapping through holes. Bottom Tap: Generate threads close to the bottom of a blind hole. Straight flute tap provides fast downward chip removal, clear threads without burrs. Round die features conical locking hole, strong locking and not loose.
The metric tap and die set can re-thread damaged or jammed threads, or to create new threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic. The surface is lubricated with grease to prevent rust.
The tap & die set is mainly for hand use (the thread tap is used with a tap wrench and the round die is used with a die stock). Apply appropriate cutting lubricant or oil during the tapping process for higher quality threads and more durable tools.
Tips: Ensure proper alignment, use proper tapping technique, and apply consistent pressure as you turn the tap & die to achieve clean, precise threads. Periodically reverse while tapping to break up chips and remove debris from the flutes, preventing clogging and ensuring smooth operation.