Akfix 905N is a neutral cure, high performance silicone sealant designed for gap filling and sealing in a wide range of use in building and construction. It combines the advantages of outstanding adhesion to building materials and non-corrosive and odorless curing. APPLICATION AREAS Sealing of connection joints in building industry (brick, wall, concrete, PVC, wood, glass etc.)Weather seal applications Mounting of windows and doors Glazing works Sealing applications in kitchens and bathrooms INSTRUCTIONS Ensure that surfaces to be sealed are clean, dry and grease free The application temperature must be between +5 °C and +40 °Cain order to reduce the deformations of the joints, their depth must be much less than their width, minimum dimensions are 5x5 mm, for wider joints the depth should be preferably half of the width and it is adjusted by the use of a backup material After the application, the sealant must be tooled with light pressure within 5 minutes to spread the material against the joint surfaces and to obtain a professional finish Excess uncured sealant may be cleaned with solvent. Cured sealant can be removed barely mechanically RESTRICTIONS It must not be used in totally confined spaces where sealant cannot cure due to lack of atmospheric moisture Akfix 905N is not over paintable It is not suitable for food contact applications.