Feature

●DSE701 MODULE: The controller includes a remote start signal input, which allows the module to be started from a predefined remote location FUNCTIONS AND APPLICATIONS: 702 MS-HC provides a manual start version with excellent engine monitoring and protection functions. This module is designed to monitor low oil pressure, high engine temperature, overspeed and user-defined auxiliary inputs EASY TO ASSEMBLE: All wiring is completed through WL terminal blocks, it is very easy and convenient to
●DSE701 MODULE: The controller includes a remote start signal input, which allows the module to be started from a predefined remote location
●FUNCTIONS AND APPLICATIONS: 702 MS-HC provides a manual start version with excellent engine monitoring and protection functions. This module is designed to monitor low oil pressure, high engine temperature, overspeed and user-defined auxiliary inputs
●EASY TO ASSEMBLE: All wiring is completed through WL terminal blocks, it is very easy and convenient to assemble, connect, repair and replace the equipment
●FAULT PROTECTION: When the engine controller detects a fault condition, it will automatically shut down the engine, and this controller has a cold water temperature protection function, with engine overspeed protection


Description

Specifications: Model Name: 702 MS-HC
Size: 8.5x7x3.8cm/3.45x2.76x1.50inch
Weight: 157g
Benefits:
Hours counter provides accurate information for monitoring maintenance and **periods
Multiple engine parameters are monitored simultaneously.
Manual Mode Operation:
1.The module is started using the on-board key/buttons
2.The user turns the key to the palm position
3. The engine pre-heat button is then pressed for the required time
4. The start button is then pressed to start the engine
5. To stop the engine the key needs to be turned to the off position
Overspeed Protection:
The engine over speed trip setting can be calibrated at the rear of the module for 50Hz or 60Hz nominal operation (57Hz or 68Hz trip respectively).
During engine cranking and for the first 10 seconds after the engine starts running, all alarm conditions are suspended (overspeed is enabled) to allow the engine to reach its running speed.
Package Included:
1x702 MS-HC Generator Controller
2xkeys
2xscrews