Feature(may vary by option.)

●Sine wave frequency range 0~15MHz
●Pulse width adjustment range: 100nS~4000S
●Square wave rise time ≤ 25ns
●Frequency accuracy soil 20ppm
●TTL/CMOS output
●Low level<0.3V

[7mm]




[9mm]





Description

JDS2800-15MHZ
Sine wave frequency range 0~15MHz
Square wave frequency range 0~15MHz
Triangular wave frequency range 0~6MHz
Pulse wave frequency range, TTL digital wave frequency range, arbitrary wave frequency range 0~3MHz
Pulse width adjustment range: 100nS~4000S
Square wave rise time ≤ 25ns
Min frequency resolution 0.01 μ Hz (0.0000001)
Frequency accuracy soil 20ppm
Frequency stability soil 1ppm/3 hours
Waveform characteristics Sine wave, square wave, pulse wave (adjustable duty cycle, precise adjustable pulse width and cycle time), three Angle wave, biased sine wave, CMOS wave, DC level (set DC amplitude by adjusting bias), half Waveform type Wave, full wave, normal step wave, anti step wave, noise wave, exponential rise, exponential fall, multiple sound waves Sink pulse, Lorentz pulse, and 60 user-defined waveforms
Waveform length 2048 points
Waveform sampling rate 266MSa/s
Waveform vertical resolution 14 bits
Amplitude resolution 1mV
Amplitude stability+0.5%/5 hours
Amplitude flatness+5% (<10MHz); Soil 10% (>10MHz)
Output impedance 50Q+10% (typical)
Protect all signal output terminals to operate within 60 under load short circuit conditions
Bias adjustment range Bias | ≤ 10- amplitude/2
Bias resolution of 0.01 V
Phase adjustment range 0~359.90
Phase resolution 0.10
TTL/CMOS output
Low level<0.3V
High level 1V~10V
Level rise/fall time ≤ 20ns
Frequency measurement range: 1 Hz~100MHz
Measurement accuracy gate time 0.01S~10s continuous adjustment
Count range 0-4294967295
Coupling method DC and AC coupling methods
Counting method manual
Input signal voltage range 2Vpp~20Vpp
Pulse width measurement with a resolution of 0.01us, capable of measuring up to 20s
Periodic measurement with a resolution of 0.01us, capable of measuring up to 20s
Voltage range DC5V+