Allowing you to connect your devices such as mobile phones and tablets from a greater distance.
Experience the authentic sound without any added effects by adjusting them to their middle points.
Easily connect to a powered subwoofer, speaker, or another amplifier for versatile audio options.
Has a unique smart algorithm that optimizes the output stage for max efficiency and min distortion.
The two plug-in NE5532 Op-Amps can be replaced by LME49720HA/MUSES02/OPA2134PA Op-Amps, etc.
Bluetooth 2.0 CH Amp | Type | Headphone Amp+Preamp |
300W x 2 | MAX Power Output | - |
Bluetooth + RCA | Input | Bluetooth + RCA |
Passive SPK +Pre-out | Output | RCA+Headphone+AUX |
| Treble&Bass Control | |
≤ 0.005% | THD | ≤ 0.02% |
≥108dB | SNR | ≥103dB |
Bluetooth 2.0 CH Amp | Type | 2.0 CH Amp |
300W x 2 | MAX Power Output | 300W x 2 |
Bluetooth + RCA | Input | RCA |
Passive SPK +Pre-out | Output | Passive SPK +Pre-out |
| Treble&Bass Control | |
≤ 0.005% | THD | <0.003% |
≥108dB | SNR | ≥110dB |
Bluetooth 2.0 CH Amp | Type | 2.0 CH Amp |
300W x 2 | MAX Power Output | 300W x 2 |
Bluetooth + RCA | Input | RCA |
Passive SPK +Pre-out | Output | Passive Speakers |
| Treble&Bass Control | |
≤ 0.005% | THD | ≤ 0.3% |
≥108dB | SNR | ≥ 90dB |
Bluetooth 2.0 CH Amp | Type | 48V Power Supply |
300W x 2 | MAX Power Output | 240W |
Bluetooth + RCA | Input | - |
Passive SPK +Pre-out | Output | - |
| Treble&Bass Control | |
≤ 0.005% | THD | - |
≥108dB | SNR | - |
--About Bluetooth connectivity issue:
1. Ensure that all wiring is correct. 2. There is no signal interference nearby.
3. Try using a different power source and outlet.
4. If there are multiple input modes, check whether other input modes work properly.
5. Try using different Bluetooth devices, speaker wires, and speakers. 6. Change the environment.
7. If there is a Bluetooth antenna included, ensure that it is connected correctly and try using a different antenna.
--About sound issue or not working properly:
1. Make sure all the cables are fully connected.
2. Adjust the treble and bass control of the power amplifier to achieve the right tone.
3. Please try to change the sound source and cables to test.