Specifications:
Compliant with PCI-Express v2.0 specification, backward compatible with PCI-Express v1.0.
Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps
Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Support 4 SATA
Support for native command queue (NCQ)
Support hot swap .
Compatible with SATA6G, 3G and 1.5G hard drives
Bus interface: PCI-Express x1 slot
Expansion interface: 4 SATA3.0 interfaces
Product driver file:
1. CD: ... DRIVER\SATA CARD\Marvell\91XX_92XX Setup, then select the appropriate folder according to the system.
The system disk and PCIE to SATA3.0 riser card connection conditions and solutions:
1. The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard. Otherwise, it will not pass. Our card riser card starts the system.
2. If it is determined that the SATA interface installation system of the system disk inserted in the motherboard is AHCI mode, then you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk as the first boot.
3, the above two conditions are available, if it still can not start, or repeated reboots, then the motherboards hard disk interface and our adapter card conflict, the solution is to enter the motherboard BIOS, set the motherboards hard disk interface options to Disabled, save and restart to start the system
Package Content:
1x SATA3.0 Expansion Card