ET4402 LCR digital bridge is designed using automatic balance bridge principle component parameter analyzer, frequency adjustable, 0.2% of the basic classification function provided by the accuracy of measurement and instrument for the vast majority of components and materials to provide accurate and complete the survey and analysis, is widely used in product research and development, components such as incoming inspection, product online applications.

?Measuring frequency up to 20KHZ
?Test level 10 ～ 2000 mv, 1 mv step continuously adjustable
?Support dc resistance (DCR), electrolytic capacitor measurement
?The internal bias voltage output 10 mv ～ 1500 mv
?3.5 inch TFT display, five shows
?Communications: USB Device, RS232 (or 485), Handle,
?Data record function (maximum, minimum, average)
?Support SCPI communication protocol
?Provide the system Settings, can according to need to configure the Chinese or English, buzzer, screen brightness, etc
?Basic measurement accuracy of 0.2%
?Manual and automatic range
?With open circuit and short circuit calibration function
?Comparator separation (5), alarm function

?Power voltage: 220V.AC/50Hz ±10%,OR 110V.AC/50Hz ±10% (Adjustable selection of buttons on the back of the instrument )
<;10W
?Display: 3.5” TFT LCD, resolution 480*320
?Interfaces: standard: RS232（or 485）, USB Device, Handler ;
?Service environment: 0°C-40°C
?Sizes: 265mm*105mm*305mm (L*W*H)
?Weight: 2.1 kg

The package includes: LCR Bridge; Power cable; Instruction manual; Test cable.
Please check the model and size before you buy.
If you have any questions about the product, please contact us.