Feature

●Large LCD display with backlight function for easy reading.
●After sales service If you encounter any problems during the use, please contact our customer service staff, we will be at your service 24 hours a day.
●Can detect transistor emitter forward bias voltage, MOSFET protection diode and amplification factor reference.
●Automatic detection Automatic detection components such as NPN, PNP bipolar transistors, N channel and P channel MOSFETs, diodes including dual diodes , thyristors, transistors, resistors and capacitors.
●Can detect transistor emitter forward bias voltage, MOSFET protection diode and amplification factor reference.


Description

Features:
A key operation, boot test, a key to get.
Large LCD display with backlight function for easy reading.
Automatically test the pin elements and display them on the LCD.
Automatic detection of components such as NPN, PNP bipolar transistors, N-channel and P-channel MOSFET, diodes (Including double diodes), thyristors, transistors, resistors and capacitors, etc.

Specification:
Brand: BSIDE
Model: ESR02 Pro
Resistor: 0Ω~50Ω, Resolution: 0.01 ohm
Capacity: 25pF~100mF, Resolution: 1pF
Inductance: 0.01mH~20H, Resolution: 0.01mH
Capacitor ESR Resolution: 0.01Ω
Battery: 1pcs x 9V 6LR61 Battery (NOT included)

Color: black

Size: Approx. 14*8*4.5cm/5.5*3.1*1.8inch
Weight: Approx.214g/7.5oz


Using Instruction:
Push "POWER / TEST" to power on and start a test, multiple measurements can be repeated by this key, auto power off 20 seconds after measurement.
Provide three kinds of socket, each socket pin 1, pin 2 and pin 3 are connected.
The placement of the device does not require the order of instruction, and the screen displays the component function of each pin after measuring.
There is a table "typical ESR value of electrolytic capacitor" at the back, it is for guiding only, these are typical value for standard grade electrolytic capacitor at room temperature.

Calibration:
Short the test pin 1, 2, 3 together and push "POWER / TEST" button, then the screen prompts to enter calibration, push the button again within 2 seconds to confirm. Few seconds latter the screen prompts to release pin 1, 2, 3, release them and wait for calibration finish.

Package List:
1 x Transistor Tester
1 x User Manual