[U2816A DCR Measurement]
Features:
Test parameter | |Z|,C,L,R, X, |Y|,B,G,D,Q,θ,DCR(optional) |
Basic Accuracy | 0.05% |
Measuring speed | Fast: 65, Med: 10, Slow: 5 (meas/sec) |
Equivalent circuit | Series and Parallel |
Ranging mode | Auto, Hold |
Trigger mode | Internal, Manual,Auto, External and Bus |
Correction | Open / short / load, 32 dot frequency correction |
List sweep | 10 points frequency, level, bias voltage / current, DC source |
Monitor | 480 * 272, 5-inch TFT color screen |
Memory | Internal:100 groups,External:500 groups(U-disk) |
|Z|, R,X | 0.01mΩ - 99.9999MΩ |
|Y|, G, B | 0.0001uS ? 999.999S |
C | 0.00001pF ? 999.999mF |
L | 0.00001μH ? 99.9999kH |
D | 0.00001 - 9.99999 |
θ(Deg) | -179.9° ? 179.9° |
θ(Rad) | -3.14159 ? 3.14159 |
Q | 0.01 - 99999.9 |
Δ% | -999.99% - 999.99% |
DCR | 1mΩ - 99.9999MΩ (optional function and only for U2816A) |
Comparators | 10 bins, BIN0 - BIN9, NG, AUX PASS / FAIL LED display |
Interfaces | RS232C/USB-HOST/USB-CDC/ USB-TMC/HANDLER/GPIB(Optional)/SCNANER(Optional) |
Temperature & Humidity | 0°C-40°C, ≤90%RH |
Power Requirements | 99V - 242V; 47.5Hz-63Hz |
Power | ≤ 20 VA |
Dimension(W×H×D) | 350mm×120mm×360mm |
Weight | approx. 3.5kg |
![]() |
![]() |
|
---|---|---|
U2816A | U2816B | |
Test Frequency | 50Hz ? 200kHz, Resolution:1mHz | 50Hz ? 200kHz, 37 typical frequency |
Output Impedance | 10Ω, 30Ω, 100Ω | 10Ω, 30Ω, 100Ω |
Test Level | 10mV ? 2V,Resolution:1mV | 10mV ? 2V,Resolution:1mV |
ALC Function | 10mV ? 1V | ? |
Internal DC Bias Source | -5V- +5V; resolution:1mV | ? |
Built-in DC Source | Optional | Optional |
DCR | Optional (1mΩ - 99.9999MΩ ) | ? |