Feature

●It can also be used to detect infrared wave forms It also can detect zener diode and has the function of -calibration.
●It can be widely used to detect NPN and transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc.
●One button operation, automatically detect and shutdown, and you can press the multi-functional button to the detector too.
●After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
●Put the pins of in corresponding area, then dial the little handle and the detector will it automatically, finally the results will display on the light TFT screen clearly Not like the usual display, this detector will show results in color.

Description

Jaquiain Display : 1.8 inch TFT Screen
Diode Range : less than 4.5V
Zener Diode : Transistor Detect Area : 0.01-4.5V
Zener Diode Detect Area : 0.01-30V
Triac Range : less than 6mA
Capacitance : 25pF-100mF
Resistor : 0.01-50M ohm
Inductance : 0.01mH-20H
Battery : 0.1-4.5V
Power Mode : Rechargeable Battery (Include)
Colour: white
Material: ABS
Size: 90 x 50 x 25mm

Contents:
1 * Multi-functional TFT Transistor tester
1 * Electronic set (Send Randomly, t accept the specified)
3 * hooks
1 * Cable

Only the above content, other are not included.
Note: Light and different displays may the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.