Feature

●Safety This MK 328 tester undergoes strict quality control and quality assurance, has a high safety factor, and has an automatic shutdown button operation, which can be used with confidence.
●RESISTANCE MATERIAL : The resistance uses 1 metal film resistor, with good performance
●MK 328 Transistor tester can automatic detection of NPN and PNP bipolar transistors, N and P channel MOSFETs, JFETs, diodes, dual diodes, unidirectional thyristors and bidirectional thyristors.
●Wide Use This product can be used to measure the current amplification factor of bipolar transistors and the voltage threshold of the base emitter. It is suitable for NPN and PNP bipolar transistors, N and P channel MOSFETs, diodes, unidirectional and bidirectional thyristors.
●The resistor uses a 1 metal film resistor with good performance

Description

Feature:
1. The resistance uses 1° metal film resistor, with good performance
2. Strict quality control and quality assurance, high safety factor, can be used with peace of mind
3. Using high-quality materials, strong and durable, has a long service life
4. Can automatically detect the pin layout of detected parts
5. Measure the current amplification factor of the bipolar transistor and the voltage of the base emitter threshold

Specification:
Item Type: MK-328 Transistor Tester
1. Key operation for automatic shutdown
2. Battery operation is possible because the shutdown current is only about 20mA
3. Automatic detection of NPN and PNP bipolar transistors, N- and P-channel MOSFETs, JFETs, diodes, dual diodes, unidirectional thyristors and bidirectional thyristors.
4. Automatically detect the pin layout of the detected parts.
5. Measure the current amplification factor of the bipolar transistor and the voltage of the base emitter threshold
6. Darlington transistor can be identified by the threshold voltage of high current amplification factor.
7. Measure the gate threshold voltage and gate capacity for MOSFET.
8. Measure and display up to four decimal digit values in the right dimension. All symbols are surrounded by the probe number of the Tester.So potentiometer. If the potentiometer is adjusted to one of its ends, the tester cannot distinguish the middle pin from the end pin.

Package List:
1 x Tester
3 x Test Pen
1 x Motherboard