Feature

●Easy to use with clear digital display and simple controls. Automatic detection of components such as NPN, PNP bipolar transistors, N channel and P channel MOSFET, diodes (Including double diodes), thyristors, transistors, resistors and capacitors, etc.
●Compact design makes it portable and convenient for on the go testing. Can detect transistor emitter forward bias voltage, MOSFET protection diode and amplification factor reference.
●Designed for SMD chips, making it perfect for circuit board and electronics testing. Large LCD display with backlight function for easy reading.
●Quickly and accurately test transistors and components with this digital meter. A key operation, boot test, a key to get.
●Measures inductance as well, allowing for a wide range of testing capabilities. Automatically test the pin elements and display them on the LCD.


Description

Specification:
Brand: BSIDE
Model: ESR02 Pro
Resistor: 0Ω~50Ω, Resolution: 0.01 ohm
Capacity: 25pF~100mF, Resolution: 1pF
Inductance: 0.01mH~20H, Resolution: 0.01mH
Capacitor ESR Resolution: 0.01Ω
Battery: 1pcs x 9V 6LR61 Battery (NOT included)
Color: black
Size: Approx. 14*8*4.5cm/5.5*3.1*1.8inch
Weight: Approx.214g/7.5oz
Using Instruction:
PushPOWER / TEST to power on and start a test, multiple measurements can be repeated by this key, auto power off 20 seconds after measurement.
Provide three kinds of socket, each socket pin 1, pin 2 and pin 3 are connected.
Theplacement of the device does not require the order of instruction, and
the screen displays the component function of each pin after measuring.
Thereis a table typical ESR value of electrolytic capacitor at the back,
it is for guiding only, these are typical value for standard grade
electrolytic capacitor at room temperature.
Calibration:
Short the test pin 1, 2, 3 together and push POWER / TEST button, then the screen prompts to enter calibration, push the button again within 2
seconds to confirm. Few seconds latter the screen prompts to release
pin 1, 2, 3, release them and wait for calibration finish.

Package List:
1 x Transistor Tester
1 x User Manual
Note:
Before testing the capacitor, be sure to discharge it, otherwise it may damage the internal circuit.
If using DC supply, please choose DC 9V~12V adapter. (including 9V and 12V)
Can be powered by a 9V 6LR61 battery (NOT included), when the battery power is under 6V, please replace a new one.