Feature(may vary by option.)
●The welding rods has nice electrical properties and high frequency insulation from humidity, not easy to wear or age.
●Great Welding Effect - With full &smoothweldingeffectbecauseof internal .
●With low melting point(647℃～658℃), great weldability and corrosion resistance, high thermal conductivity, high electric conductivity and excellent processing performance.
●No Need Solder Powder-You dont have to use other flux powder with aluminum alloy as the welding core and coating as the salt base. Very convenient and easy to weld.
[10PCS 50X0.16cm]
Description
these welding repair rods are necessory accessories for handymen, craft-lovers, mechanics to fix or DIY sundry things.
Low Temperature Aluminum Electrodes Do Not Require Solder Powder For Soldering
Very Wide Application 。It is mainly used for argon arc welding and filling material for pure aluminum, connection with aluminium bus and guide rod of electrolytic aluminium plant and electric power, chemistry, food and so on.
No Need Solder Powder 。You dont have to use other flux powder with aluminum alloy as the welding core and coating as the salt base. Very convenient and easy to weld.
Widely Use In Life 。 Suitable for welding or surfacing welding alloy with high strength, good forgeability &goodcorrosionresistanceLight Weight &SmallVolumeSize of 500X1.6mm &weightof25g very easy to bend &carryStorage placed in a ventilated and dry place, can be stored for a long time
Size:50X0.16cm
Quantity: 10/20/50PCS
Material: Aluminum
Color: Silver
Melting Point: 647℃～658℃
Diameter: 1.6mm / 0.062"
Length: 500mm / 19.7"
Recommended for welding or brazing aluminum alloy: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005, and cast alloys 710.0 and 711.0
Item Wight: Approx. 2.5g
How to Use:
Step 1: Clean and polishe the physical surface.
Step 2: Heat the surface of the base material, until the temperature of the wire to the operating temperature of 380℃～400℃, so you can rely on the parent metal heat transfer welding wire to form welds, should not use the flame to burn wire.
Step 3: When repairing thin aluminum, as long as the aluminum base metal heated to the appropriate working temperature, and then use the wire back and forth friction melting to form a weld, only with a metal brush melt welding wire to weld at the weld.
Step 4: Use propane gas to weld s mall object, natural slow cooling after welding.
NOTE:
1. The surface of the base metal must be clean.