Feature

●100% Pure
●Flat wire 1.3*3.2*500mm
●The melting point is low, and it has good fluidity and can flow into gaps with small gaps. The price of solder is cheap, so it is widely used.
●Using phosphor copper material, stable performance, widely used in various MIG welding equipment
●The brazing rod is easy to install and remove.
●It is widely used in the brazing of copper and copper alloys in the motor, instrument and refrigeration industries. It is often used in the welding of refrigerators, air conditioners, copper pipes, copper plates, and copper pipes..

Description

Name: High Phosphorus Copper Electrode
Specification: Flat: 1.3*3.2*500mm
Welding process: oxygen welding/gas welding/high frequency welding/flame brazing/resistance welding
Composition: P=7.0-7.5%; CU margin
Melting point: 710-793°C
Uses: Widely used for brazing copper and copper alloys in motors, meters and refrigeration industries,
Commonly used for welding refrigerators, air conditioners, copper pipes, copper plates, copper pipes, etc.
Tips:
1. The grease, oxide and other dirt on the brazing part and the solder surface must be strictly removed before brazing.
2. No flux is needed when brazing copper, but flux must be used when brazing copper alloys.
3. The fluidity of the solder can be adjusted appropriately through the preheating of the base material and the level of the brazing temperature.

Precautions:
1. Due to manual measurement, please allow a difference of 1-3mm, thank you!
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product, please understand.