Feature

●Hole punching and PCB module mounting are more convenient.
●Made of high-quality electronic components, stable and reliable performance.
●Photoelectric isolation is used between the input stage and the output stage, and the two stages are completely independent, which effectively avoids the instability caused by mutual interference of the system and effectively protects the output node of the PLC.
●Isolate and amplify the weak control (only a few milliamps of current) by photoelectricity, and finally output a higher power control to directly drive the motor, contactor, solenoid valve, etc.
●The response time is as low as milliseconds and there is no limit on the number of switches. It can directly replace traditional relays, reducing maintenance time and costs.


Description

1. Isolate and amplify the weak control (only a few milliamps of current) by photoelectricity, and finally output a higher power control to directly drive the motor, contactor, solenoid valve, etc.
2. The response time is as low as milliseconds and there is no limit on the number of switches. It can directly replace traditional relays, reducing maintenance time and costs.
3. Photoelectric isolation is used between the input stage and the output stage, and the two stages are completely independent, which effectively avoids the instability caused by mutual interference of the system and effectively protects the output node of the PLC.
4. Made of high-quality electronic components, stable and reliable performance.
5. Hole punching and PCB module mounting are more convenient.

Specification:
Item Type: 16 Channel PLC Amplifier Board
Input Voltage: DC12-36v active low
Output Voltage: 12-36V DC
Output Current: Less than 5A (long time) 50A FET
Installation Method: Drilling, PCB module rack

packing list:
1 x 16 Channel PLC Amplifier Board