Feature

●100% Pure
●Low temperature phosphor copper welding rod is easy to install and remove.
●Using phosphor copper material, stable performance, widely used in various MIG welding equipment
●The solder has good fluidity and can flow into joints with small gaps, but the solder is brittle. It is generally used in the electromechanical and instrument industries to braze copper and brass parts that are not subject to impact loads.
●Our welding rods are suitable for the electrical machinery industry. Mainly used for welding of refrigerator copper pipes, air conditioner copper pipes, and copper products
●30 round phosphor copper electrodes: 2.5*500mm

Description

Name: Welding Rod
30 round phosphor copper electrodes: 2.5*500mm
Packing: 30pcs welding rod
Tips:
1. The grease, oxide and other dirt on the brazing part and the solder surface must be strictly removed before brazing.
2. No flux is needed when brazing copper, but flux must be used when brazing copper alloys.
3. The fluidity of the solder can be adjusted appropriately through the preheating of the base material and the level of the brazing temperature.

Precautions:
1. Due to manual measurement, please allow a difference of 1-3mm, thank you!
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product, please understand.