Feature(may vary by option.)
●100% Pure
●Low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding and can flow into small spaces
●This economical and practical welding rod kit is usually used for welding air conditioners and refrigerator copper pipes, which is easy to replace
●Our welding rods are suitable for the electrical machinery industry. Mainly used for welding of refrigerator copper pipes, air conditioner copper pipes, and copper products
●A phosphor copper electrode length: 400mm, width: 3.2mm, thickness: 1.3mm; B high phosphor round electrode diameter 2.0mm and length 500mm
●Using phosphor copper material, stable performance, widely used in various MIG welding equipment
[20PCS-400MM]
[30PCS-500MM]
Description
Name: Welding Rod
A phosphor copper electrode length: 400mm, width: 3.2mm, thickness: 1.3mm; B high phosphor round electrode diameter 2.0mm and length 500mm
Packing: 10pcs *20pcs * 30pcs welding rod
Tips:
1. The grease, oxide and other dirt on the brazing part and the solder surface must be strictly removed before brazing.
2. No flux is needed when brazing copper, but flux must be used when brazing copper alloys.
3. The fluidity of the solder can be adjusted appropriately through the preheating of the base material and the level of the brazing temperature.
Precautions:
1. Due to manual measurement, please allow a difference of 1-3mm, thank you!
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product, please understand.