Feature

●HIGHOR PULL DOWN OUTPUT: Whether the output terminal is highoutput or pull down output can be realized through the jumper cap.
●SIMULTANEOUSLY CONTROL DIFFERENT VOLTAGES: The 4 independent channels of 817 on the board can simultaneously control different voltages.
●TURN ON CONTROLLED TERMINAL: Realize 3.3V or 5V control interface of 3.6-24V voltage . After the control terminal is turned on, the controlled terminal will also be turned on.
●DRIVE VARIOUS OCCASIONS: Strong interference resistant ability for driving high power transistors, MOS tubes, and other high voltage drive occasions. Can directly drive low power 24V relays as well.
●EXCELLENT PCB: Good quality PCB materials ensure reliability, miniaturization, good maintenance, and interchangeability.

Description

[HIGHOR PULL DOWN OUTPUT: Whether the output terminal is highoutput or pull down output can be realized through the jumper cap.
[SIMULTANEOUSLY CONTROL DIFFERENT VOLTAGES: The 4 independent channels of 817 on the board can simultaneously control different voltages.
[TURN ON CONTROLLED TERMINAL: Realize 3.3V or 5V control interface of 3.6-24V voltage . After the control terminal is turned on, the controlled terminal will also be turned on.
[DRIVE VARIOUS OCCASIONS: Strong interference resistant ability for driving high power transistors, MOS tubes, and other high voltage drive occasions. Can directly drive low power 24V relays as well.
[EXCELLENT PCB: Good quality PCB materials ensure reliability, miniaturization, good maintenance, and interchangeability.

Spec:

Item Type: Optocoupler Isolation Board
Material: PCB
DriverVoltage: 3.6-24V
Output Voltage Range: 3.6-30V (output current depends on the specific situation, but the maximum power is not exceed 10MA, the total power is constant, the voltage and current are inversely proportional)

Package List:
1 x Optocoupler Isolation Board

Note:
If it is a pulse , please note that the limit of 817 is below 4KHZ, please do not use this module for controlgreater than 4KHZ, which will not work properly.