Feature

●design, easy to install. design, easy and to use.
●for pcb This Optocoupler Isolation Board uses for pcb materials, offering reliability, miniaturization, and good and interchangeability.
●Specification: Type Optocoupler Isolation Board; PCB; Driver Voltage 3.6 24V; Output Voltage 3.6 30V output depends on the specific situation, but the is not exceed 10MA, the is constant,
●Selling Summary: Strong compatibility, selling description This product is not only a photoelectric isolation module, but also the function of a voltage adapter module, which can meet the different voltage requirements of a variety of devices, realizing one machine with uses.
●Optocoupler Isolation Board Simultaneous Different Voltages: The 4 Channels Of 817 On The Board Are Independent, Which Can Realize Simultaneous Of Different Voltages, Etc.


Description

1. HIGH OR PULL DOWN OUTPUT: Whether the output terminal is high output or pull down output can be realized through the jumper cap
2. SIMULTANEOUS CONTROL DIFFERENT VOLTAGES: The 4 channels of 817 on the board are independent, which can realize simultaneous control of different voltages, etc.
3. TURN ON CONTROLLED TERMINAL: Can realize 3.3V or 5V control interface of 3.6-24V voltage , after the control terminal is turned on, the controlled terminal will also be turned on
4. DRIVE VARIOUS OCCASION: Optical isolation has strong interference resistant ability, which can drive high power transistors, MOS tubes and other occasion that require high voltage drive, and can also directly drive low power 24V relays to work
5. EXCELLENT PCB: Good quality PCB materials possess reliability and miniaturization, good maintenance and interchangeability

Specification:
Item Type: Optocoupler Isolation Board
Material: PCB
Driver Voltage: 3.6-24V
Output Voltage Range: 3.6-30V (output current depends on the specific situation, but the maximum power is not exceed 10MA, the total power is constant, the voltage and current are inversely proportional)

PackageList:
1 x Optocoupler Isolation Board

Notice:
If it is a pulse , please note that the limit of 817 is below 4KHZ, please do not use this module for control greater than 4KHZ, which will not work properly.