Feature
●Piezo igniter with Groud Terminal （keep flat terminal touch metal always）
●200℃ resistance wire 1m long
●Set of 2 （send email if you cant get it work we will send operation viedo）
●Voltage over 20kV , Life time: over 35000 times
●Attention for installation: Keep the ceramic pin around 5mm to the burner hole or it may not ignite gas
Description
DIY Piezo Igniter Kit 2 Pack
39.4 long Lead without Earth Wire NOT universal
Product packaging: 2 sets of piezo igniter with ceramic spark ignition electrode
The lead 39.4" long, there is heat resistance coating over the wire to ensure safe use, wire long enough to go from the farthest burner to the electronic ignition box
This propane button piezoelectric igniter kit with a ground wire has a wide range of compatibility, can be used in gas stoves/ovens.fireplaces.patio heater. wall furnace. gas boiler or outdoor barbecue replacement parts
The length of the piezoelectric igniter is 85 mm, cap diameter is 26mm, spark plug igniter output voltage≥ 18Kv
- no battery needed just press m one press one spark for play an ignition role
- lifetime: over 30000 times
- Note: the electrode tip must be installed no more than 1/4 inch from the edge of the burner.
- Keep the distance between the ceramic pin and the burner hole within 5mm or may not ignite gas
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 10 Jets Casting Burner | AAA Igniter Kit for Fire Pit | Piezo Igniter 2pcs | Igniter for Weber Q Grill | Dump Switch Safety 2 pcs | Igniter Kit for Blackstone 36" | |
| Power | Propane | AAA Battery | Manual | Manual | Manual | AA Battery |