Feature(may vary by option.)

●High Performance: Adopt high receiving sensitivity (RSSI) and strong to noise ratio (SNR) optimization, with powerful anti interference technology.
●Point to Multi Mode: Any Lora module can be used as a master station, and other can be used as slave stations to collect sequentially device data under each Lora.
●Point to Point Mode 2: PLC interconnection mode, 2 Lora modules support dual way data transceiver and mutual transmission under the same frequency.
●Relay Networking: Can realize multi relay networking, for ultra long distance or complex environment networking, and run multiple groups of networks in the same area at the same time.
●Point to Point Mode 1: PC connection communication, 2 Lora modules support dual way data transceiver and mutual transmission under the same frequency.

[10 Meter Antenna]




[3 Meter Antenna]





Description

1. High Performance: Adopt high receiving sensitivity (RSSI) and strong to noise ratio (SNR) optimization, with powerful anti interference technology.
2. Point to Point Mode 1: PC connection communication, 2 Lora modules support dual way data transceiver and mutual transmission under the same frequency.
3. Point to Point Mode 2: PLC interconnection mode, 2 Lora modules support dual way data transceiver and mutual transmission under the same frequency.
4. Point to Multi Mode: Any Lora module can be used as a master station, and other can be used as slave stations to collect sequentially device data under each Lora.
5. Relay Networking: Can realize multi relay networking, for ultra long distance or complex environment networking, and run multiple groups of networks in the same area at the same time.

Specification:
Item Type: Wireless Transparent Transmission Module
Model: LORA ETH
Material: ABS
LoRa Chip Solution: SX1268
LoRa Transmission Mode: Half duplex, transparent transmission
Air Baud Rate: About 300-19200
Transmit Power: 20dbm
Data Length: Cache 1024Byte
Communication Interface: RS485 (terminal)
LORA Module:
Communication Interface: RS232, RS485, RS422 (the three communication interfaces are not independent of each other and cannot be sent and received at the same time)
Baud Rate: 9600 by default; parity bit and stop bit can be set (through the host computer, up to 115200)
Communication Distance: 5KM (open)
Modulation Method: Lora (with FSK, OOK, GFSK)
Transmission Rate: Lora mode, 0.2-37.5kbps
Working Frequency Band: 410-525Mhz
Data Transmission Method:
Support stream mode and packet mode (convenient to use various applications)
Streaming Mode: 1 serial port cannot send 1
Packet Mode: Wait for the serial port to be received once and then send it wirelessly
Maximum Transmit Power: Maximum 20dbm (the larger the value, the farther the transmission distance)
Receiving