Plastic shell, high mechanical strength, high hardness, corrosion resistance, no rust can be used outdoors for a long time.
8 indication directions, high-performance bearings, small rotational resistance, accurate measurement, more convenient and practical.
Small and light in size, easy to carry and assemble, anti-electronetic interference treatment, can be applied to both four-wire and three-wire connection.
Anti-exposure, high impact strength, and with the internal smooth bearing system to the accuracy of information collection.
Widely used in the measurement of wind direction in greenhouses, environmental protection, weather stations, ships, terminals, breeding and other environments.
Condition: Brand New
Item Type: Wind Speed Sensor
Power Supply (Default): 10-30V
Maximum Power Consumption: Current Output: 1.2W
Transmitter Circuit Operating Temperature: -20 to +60 , 0%RH-80%RH
Measuring Range: 8 Directions
Dynamic Response Time: less than or equal to 0.5s
Output Signal Current Output: 4-20mA
Load Capacity Current Output: less than or equal to 600 ohm
Calculation Method:
0-10V Output Comparison Table
Output Value (V) Corresponding Wind Direction
?0 North Wind
?1.4286 Northeast Wind
?2.8571 East Wind
?4.2857 Southeast Wind
?5.7143 South Wind
?7.1429 Southwest Wind
?8.5714 West Wind
?10 Northwest Wind
Power Wiring: Wide Voltage 10-30V Power Input
Common Problems and Solutions:
No output or output error possible causes:
The range corresponding error causes the error PLC calculation. Please refer to the technical indicators for the range.
The wiring method is incorrect or the wiring sequence is wrong.
The power supply voltage is incorrect (24V power supply for 0-10V type).
Thedistance between the transmitter and the collector is too long, causing signal disturbance.
Colour: black
Material: plastic
Size: 190x144mm
Packing: 1 * An