Feature

●【Size and Material】Product Height: 1.1m/3.6ft; Drill Bit Length: 80cm/31.49inch; Drill Bit Size: 8in; Assembled Size of Engine and Handle: 60*34*34cm/23.62*13.38*13.38inch.Mainly made of Aluminum, Steel and PP material. With a sharp auger drill bit, it can quickly drill into the soil under the drive of the engine to help you quickly dig holes in the ground.
●【Efficient Work】Powered by powerful 43cc 2-stroke engine, Power: 1.25 kW; Horsepower: 1.7 hp; Rotational speed: 6500-8500 rpm. There are many enlarged cooling holes on the engine casing, which helps to dissipate heat quickly and timely. The engine will easily pull cylinders or stall even under high temperature, and the working efficiency is very high.
●【Easy to Operate】Adopting cord starter design, the machine can be easily started by pulling the cord switch. with dual handles, you can operate the machine more stably and comfortably. It has the throttle switch on one handle. Pressing the switch can switch off the engine or accelerate the operation. Adopting fine technology car-bu-re-tor, the gasoline can be fully burned during operation to avoid waste.
●【Detailed Design】The machines fuel tank is located on the engine, making it easy for you to keep track of the proper fuel level with ease. There is an oil bubble for checking whether the oil has been supplied. Press the oil bubble a few times before starting. If the oil pipe has oil in and out, it suggests that the oil has been supplied. The drill bit has a removable design for easy storage and replacement.
●【Applicable Scope】Our post hole auger is handheld design, two handles make it easy to carry to outdoor works. It can be used for installing fence posts, planting trees, greenhouse piling, punching holes, organizing your backyard, etc. It can only be used for dirt work and not for rock, stone or metal, or gravel surfaces. It is often used in farms, parks, gardens, yards, fields, etc.


Description

Product Parameters

Color: Red and Black

Material: Aluminum + Steel + PP

Engine: 2-Stroke

Cylinder Capacity: 43cc

Fuel Mix: 25:1

Power: 1.25kw

Feature: Easy Starting System (Cord Starter)

Rotational Speed: 6500-8500RPM

Horsepower: 1.7HP

Product Height: 1.1m/3.6ft

Drill Bit Length: 80cm/31.49inch

Drill Bit Size: 8in

Assembled Size of Engine and Handle: 60*34*34cm/23.62*13.38*13.38inch

Machine Package Size: 42*31*31cm/16.5*12.2*12.2inch

Machine Gross Weight: 10.5kg/23.1lbs

Machine Net Weight: 8.3kg/18.3lbs

Drill Bit Package Size: 80*20*20cm/31.5*7.9*7.9inch

Drill Bit Gross Weight: 3kg/6.6lbs

Drill Bit Net Weight: 2.85kg/6.3lbs

Application: It is suitable for use on farms, parks, gardens, yards, fields, etc.

Package Included

1* Engine

2* Handles

1* 8inch Drill Bit

1* Fuel Bottle

1* English Instructions

Other Accessories for Installation

Notes

1.You should fill the fuel tank with mixed oil (gasoline: two-stroke engine oil=25:1).

2. Press the oil bubble a few times before starting. If the oil pipe has oil in and out, it suggests that the oil has been supplied.

3.Pull the starter quickly when starting, dont stop midway when pulling. Please start the machine before the throttle switch opens.

4.When cold starting the machine, close the damper first, then open it again so that it can run normally.

5.Please note that it can only be used for dirt work and not for rock, stone or metal, or gravel surfaces