Package Include
2 x Gear Puller
Features
- Itinerary: 80MM Handle Puller
- Screw hardness: up to HRC45 Bearing Puller
- Material: carbon steel Three-jaw Puller
- Hexagonal width: 14MM Wheel Pulling Machine
- Material: Carbon Steel.
- Screw thread: M14
- Size: 10.5 x 7.5 x 7.5 cm.
- Color: As Shown.
- Screw strength rating: 4.8
- Warm Tip: Dear buyer, due to lighting effect, monitors brightness, manual measurement, etc., there could be some slight differences in the color and size between the photo and the actual item. Sincerely hope that you can understand! Thank you!
- Connecting bolts: M8
- Top diameter: 50-100MM
- Pulling force: 1.5 tons
- Diameter at the tip: 9MM
- Pole length: 120MM
- Freely rotate. Upon the center point form pull wheel to piston, the center point to be pulled is easily met Gear Puller.
- Design for Slide Gears, Pulley, and Flywheel use. Makes removal simple and damage-free.
- Can be use for disassembled the bearing and shaft tool, also can be use for remove all kinds of mechanical equipment of pulley, gears, bearings and so on.
- Jaws can be adjusted from high to low point. Make you use it more easily and conviently.
Goods Description
Bearing Puller Made by material, durable and provide .Three-jaw Puller It has compact structure, flexible use, easy to carry and save labour, less site limitation,suitable for all kinds of maintenance use.Wheel Pulling Machine Professional designed, easy to use, make you do the mechanical works easily and high efficiently