[As Shown Size 1]

[As Shownx2pcs Size 2x2pcs]

[As Shownx3pcs Size 1x3pcs]

[As Shown Size 2]

[As Shownx2pcs Size 1x2pcs]

Package List
1 x Gear Puller

Characteristics
- Material: carbon steel Handle Puller
- Material: Carbon Steel Three-jaw Puller.
- Connecting bolts: M8 Bearing Puller
- Hexagonal width: 14MM Wheel Pulling Machine
- Pulling force: 1.5 tons
- Itinerary: 80MM
- Screw hardness: up to HRC45
- Diameter at the tip: 9MM
- Color: As Shown.
- Size: 10.5 x 7.5 x 7.5 cm.
- Pole length: 120MM
- Screw thread: M14
- Screw strength rating: 4.8
- Top diameter: 50-100MM
- Warm Tip: Dear buyer, due to lighting effect, monitors brightness, manual measurement, etc., there could be some slight differences in the color and size between the photo and the actual item. Sincerely hope that you can understand! Thank you!
- Design for Slide Gears, Pulley, and Flywheel use. Makes removal simple and damage-free Gear Puller.
- Can be use for disassembled the bearing and shaft tool, also can be use for remove all kinds of mechanical equipment of pulley, gears, bearings and so on.
- Jaws can be adjusted from high to low point. Make you use it more easily and conviently.
- Freely rotate. Upon the center point form pull wheel to piston, the center point to be pulled is easily met.

Goods Information
Gear Puller Professional designed, easy to use, make you do the mechanical works easily and high efficiently.bearing removal tool It has compact structure, flexible use, easy to carry and save labour, less site limitation,suitable for all kinds of maintenance use.Three-jaw Puller Made by material, durable and provide