[1 mediumx2pcs]
[1 mediumx3pcs]
[1 medium]
Package List
1 * Nema 17 2 Phase 4-Wire 1.5A 60mm 1.8° Stepper Motor for 3D Printer 1 * Cable
Characteristics
- Insulation grade: Grade B motor for 3d printer.
- Insulation resistance: Cold insulation resistance should be more than 100 (between the motor stator and terminal) High torque stepper motor
- Exterior: Shown as the pictures hedgehog bed.
- Current Rating (single-phase): 1.5 A DC Nema stepper motor.
- Size (L * W * H): ca. 42 * 42 * 60mm / 1.65 * 1.65 * 2 4 wire stepper motor.
- Exciting mode: two-phase 4-wire. It is available for the of the forward and reverse degree stepper motor.
- Holding torque: ≥ 600mN.m (I = 1 nema 17 stepper motor.
- Dielectric strength: The space between the motor stator and terminal should withstand able AC600V / 1s without degradation. Leakage current of less than 1 mA 2 phase stepper motor.
- Drive mode: Hack wave constant current drive 7HD48004-22B stepper motor.
- Nominal voltage: 2.4V motor stepper motor.
- Cogging torque: 40mN.m REF
- Rotational inertia: 102g.cm 2
- Effet: The order of power is AB-BC-CD-DA, seen from the shaft end to CW.
- Wnding Inductance: 3.6mH ± 20%
- Motor Weight: 0.48 kg / pcs REF
- : 1.8 °.
- Max Blank switching frequency: ≥ 1200pps
- Temperature rise: <80K
- accuracy: 1.8 ° ± 5%
Goods Description
3d printer stepper motor Necessary replacement for 3D printer.motor stepper motor This item is a stepper motor, with 4 cable for convenient use, suitable for 17HD34008-22B mixing type stepping motor