Feature

●[GREAT DURABILITY] - Dustproof and waterproof structure protects against coolant and iron filings. Provides excellent durability.
●[WIDE APPLICATION] - Perfect for tool measurement, wear and tear detection, and tool breakage detection on CNC machine tools and engraving and milling machines.
●[RELIABLE WORKING] - Normally open 6 wire high accuracy tool setting instrument with 8mm stroke and 0.001mm positioning accuracy. Contact life of up to 3 million times and contact force of 1N.
●[SMART ALARMING] - Provides an alarm when the overtravel limit is exceeded to prevent damage accidents. Can be directly input to NC and programs with stable performance.
●[STABLE OPERATION] - No deviation caused by temperature and power voltage fluctuations. Does not require a built-in amplifier.

Description

Spec:
Item Type: Touch Tool Setter
Model: M26D-30-1
Voltage: DC 24V
Line Length: The length of the standard line is 5m / 16.4ft(approx.), with a protective tube length of 1.5m / 4.92ft(approx.). There may be a small error in the manual measurement.
Output: NO, normally open.
Knife Facing: Approx. 30mm / 1.18in
Stroke: Approx. 8mm / 0.31in
Repetitive Accuracy: 0.001mm under 50-200mm per min operating speed.
Contact Life: 3 million times.
Waterproof Grade: IP67
Contact Force: 1N for vertical installation.
Cutting Material: Tungsten Steel Superhard Alloy
Treatment: Grind the mirror for 4 seconds
Contact Rating: DC 24V 20mA maximum, and the recommended value is 10mA resistance load.
Indicator Light: Normally open LED light on, normally closed without LED indication during operation.
Alarm: Overtravel alarm .

How to Use:
Direct installation and use.

packing list:
1 xTouch Tool Setter

Notice:
1. Try to install it in a place with less iron filings and splashing on the workbench.
2. It must be installed vertically to ensure a flat bottom to avoid excessive accuracy errors.
3. After the wiring is completed, place the tool setting instrument in another place on the tool setting seat, test that the tool setting is normal, and then fix it in the correct position.
4. Please use it correctly within the rated DC 24V ± 10% 20mA maximum power range to avoid overloading and burning internal components.
4. The tensile strength of the power and lines is below 20N, that is, 2KG, and the bending radius of the metal tube of the power line sheath is R7.