Feature(may vary by option.)
●SELF STICK VINYL WALL BASE: Vinyl wall base 0.08" (thickness) x 4" (width) x 20 feet (length) made of high-quality vinyl with strong peel and stick backing, will not fade, deform and have high resilience after long-term use. Note: If the temperature is below 68℉, please use a hair dryer to heat the adhesive before sticking it to the wall.
●FLEXIBLE AND DURABLE: The surface of the cabinets baseboard trim has been specially treated to effectively block scratches, flexible enough to work around the corners without cutting, just use a heat gun or hair dryer to soften the base of the wall.
●EASY TO APPLY: NO NEED SCREWS OR DRILLING. clean the installation area, measure and cut vinyl baseboard panel to the desired length, peel off the backing adhesive, fold the bottom feet, stick it onto a smooth surface, press back and forth with roller to make it firmly attached to the wall.
●TOE DESIGN: The bottom small edge that bends to a 90 degree angle that goes toward the floor to help cover gaps from flooring to wall and covers up defects and uneven ground, while protects cabinet base and floor from moisture damage.
●KINDLY NOTE: Using a hair dryer or heat gun to preheat the self-adhesive strip before sticking, the effect will be better. If you want to replace the baseboard trim, you can first use a hair dryer to heat it up and slowly tear it off, it will not damage the surface of the furniture.
[4 Inch(W) x 20 Feet(L) White]
[4 Inch(W) x 20 Feet(L) Black]
Description
Features:
Strong self-adhesive, peel and stick, installed without tools.
Flexible and durable vinyl material, easy to cut and use.
Suitable for flat and smooth dry wall such as tile, plastic, marble, metal, glass, wood, smooth wall.
Apply to living room, bathroom, bedroom, kitchen, playground, laundry room, etc.
Specification:
Material: PVC
Length: 20 feet / 40 feet / 60 feet
Width:, 4 inches
Thickness: 0.08 inch
How to Install:
1. Before sticking, please clean the specific area of the wall, removing dust and water stains;
2. Measure the length of the wall and mark it in advance avoid repeated sticking;
3. Cut to desired length carefully;
4. Peel off the adhesive stickers;
5. Using a hair dryer or heat gun to preheat the self-adhesive strip before sticking for better result.
6. Stick the baseboard trim on the wall, press back and forth to make it firmly fixed on the wall.
Note: If peeling, powder falling, uneven and wet walls are not suitable for pasting, wall cloth and wall stickers can be pasted with solid nail free adhesive.