ProGlow Powersports Wash is specially formulated to clean the exterior of equipment and will not scar, etch, fade, discolor finishes or coatings. It also will not strip away grease from bearings, suspension linkages, and pivot points.
|
|
|
|
---|---|---|---|
1 scoop (3 oz) per 1 gallon of waterUse one level scoop per one gallon of water, we recommend using a pump sprayer. NOTE: Close and seal the bag when you are finished as the ProGlow granules are sensitive to moisture in the air. |
Add water, let the Wash activate for 8 minutesWhile the Wash is activating, we recommend giving the surface to be cleaned a quick rinse and remove any large chunks of dirt or mud. This will help ProGlow penetrate to the surface of the vehicle. |
Apply with pump sprayer or foam canonWet the surface and anywhere there is mud and dirt completely. Allow ProGlow to sit and work for at least 8 minutes. Applying ProGlow to the entire vehicle or half the vehicle at a time usually does the trick. |
Rinse with hose or power washerRinse thoroughly. Obviously, a power washer will deliver the best the results. But a hose will do the job when dirt and mud are not that thick. SCRUBBING NOT REQUIRED. |
ProGlow Degreaser is a versatile formula that breaks up and removes oil and grease fast!